1. The use of _____ instruments is merely confined within laboratories as standardizing instruments.
(a) absolute
(b) indicating
(c) recording
(d) integrating
(e) none of the above
Ans: a
2. Which of the following instruments indicate the instantaneous value of the electrical quantity being measured at the time at which it is being measured ?
(a) Absolute instruments
(b) Indicating instruments
(c) Recording instruments
(d) Integrating instruments
Ans: b
3. _____ instruments are those which measure the total quantity of electricity delivered in a particular time.
(a) Absolute
(b) Indicating
(c) Recording
(d) Integrating
Ans: d
4. Which of the following are integrating instruments ?
(a) Ammeters
(b) Voltmeters
(c) Wattmeters
(d) Ampere-hour and watt-hour meters
Ans: d
5. Resistances can be measured with the help of
(a) wattmeters
(b) voltmeters
(c) ammeters
(d) ohmmeters and resistance bridges
(e) all of the above
Ans: d
6 According to application, instruments are classified as
(a) switch board
(b) portable
(c) both (a) and (b)
(d) moving coil
(e) moving iron
(f) both (d) and (e)
Ans: c
7. Which of the following essential features is possessed by an indicating instrument ?
(a) Deflecting device
(b) Controlling device
(c) Damping device
(d) All of the above
Ans: d
8. A _____ device prevents the oscillation of the moving system and enables the latter to reach its final position quickly
(a) deflecting
(b) controlling
(c) damping
(d) any of the above
Ans: c
9. The spring material used in a spring control device should have the following property.
(a) Should be non-magnetic
(b) Most be of low temperature co-efficient
(c) Should have low specific resistance
(d) Should not be subjected to fatigue
(e) All of the above
Ans: e
10. Which of the following properties a damping oil must possess ?
(a) Must be a good insulator
(b) Should be non-evaporating
(c) Should not have corrosive action upon the metal of the vane
(d) The viscosity of the oil should not change with the temperature
(e) All of the above
Ans: e
11. A moving-coil permanent-magnet instrument can be used as _____ by using a low resistance shunt.
(a) ammeter
(b) voltmeter
(c) flux-meter
(d) ballistic galvanometer
Ans: a
12. A moving-coil permanent-magnet instrument can be used as flux-meter
(a) by using a low resistance shunt
(b) by using a high series resistance
(c) by eliminating the control springs
(d) by making control springs of large moment of inertia
Ans: c
13. Which of the following devices may be used for extending the range of instruments ?
(a) Shunts
(b) Multipliers
(c) Current transformers
(d) Potential transformers
(e) All of the above
Ans: e
14. An induction meter can handle current upto
(a) 10 A
(b) 30 A
(c) 60 A
(d) 100 A
Ans: d
15. For handling greater currents induction wattmeters are used in conjunction with
(a) potential transformers
(b) current transformers
(c) power transformers
(d) either of the above
(e) none of the above
Ans: b
16. Induction type single phase energy meters measure electric energy in
(a) kW
(b) Wh
(c) kWh
(d) VAR
(e) None of the above
Ans: c
17. Most common form of A.C. meters met with in every day domestic and industrial installations are
(a) mercury motor meters
(b) commutator motor meters
(c) induction type single phase energy meters
(d) all of the above
Ans: c
18. Which of the following meters are not used on D.C. circuits
(a) Mercury motor meters
(b) Commutator motor meters
(c) Induction meters
(d) None of the above
Ans: c
19. Which of the following is an essential part of a motor meter ?
(a) An operating torque system
(b) A braking device
(c) Revolution registering device
(d) All of the above
Ans: d
20. A potentiometer may be used for
(a) measurement of resistance
(b) measurement of current
(c) calibration of ammeter
(d) calibration of voltmeter
(e) all of the above
Ans: e
21 ___ is an instrument which measures the insulation resistance of an electric circuit relative to earth and one another.
(a) Tangent galvanometer
(b) Meggar
(c) Current transformer
(d) None of the above
Ans: b
22. The household energy meter is
(a) an indicating instrument
(b) a recording instrument
(c) an integrating instrument
(d) none of the above
Ans: c
23. The pointer of an indicating instrument should be
(a) very light
(b) very heavy
(c) either (a) or (b)
(d) neither (a) nor (b)
Ans: a
24. The chemical effect of current is used in
(a) D.C. ammeter hour meter
(b) D.C. ammeter
(c) D.C. energy meter
(d) none of the above
Ans: a
25. In majority of instruments damping is provided by
(a) fluid friction
(b) spring
(c) eddy currents
(d) all of the above
Ans: c
Thanks for sharing the questions & Answers on Instrumentation.