Latest CCNP Interview Questions Part – 7

In A Router, What Is Default Route Used For?

It is used when there is no specific entry in the routing IP table.

What Will The Bgp First Check To See If A Prefix Is Accessible?

BGP will check next hop attribute to determine next hop is accessible

What Are The Two Methods For Reducing The Number Of Ibgp Connection In A Network?

These are confederation and route reflector

In A Network Of Routers And Switches, What Is The Difference Between Routing And Switching?

Switching make the final ultimate delivery while routing select the best available path in a network.

What Is The Difference Between Rip And Ospf?

RIP broadcast its routing table after each 30 seconds while OSPF only update those entries which are missing the neighbor routing table

What Is The Difference Between Classless And Classfull Routing?

Classfull routing don not advertise subnet mask information along with the network prefix while classless routing do.

What Is The Main Purpose Of Areas In Ospfv2?

Routers networks are divided in to areas which are they connected to backbone area0. The areas help you to give performance and easy to handle big network

What Types Of Routers Are Allowed In Totally Stubby Areas?

In totally stubby area, inter area and intra area route and default route are allowed.

What Are The Router Types In Ospf?

There are Internal Router, ASBR and ABR

What Will Be The Broadcast Ip Of The 202.4.81.96/27?

202.4.81.127

In Ospfv2, What Is The Purpose Virtual Link?

The main purpose of virtual link is to connect nonzero area with backbone area.

What Is A Load Balancer?

It is a network device which is used to balance the load in on available nodes.

What Is Voice Circuit?

It is specially used for voip only because it have ports enable on it which allow voip traffic.

What Qos Parameters Are Required To Transfers Credential File From One Source To A Destination?

The main QoS parameters required is Bandwidth and Data loss.

What Does Dns Do In A Network?

DNS is domain name server. It is used to translate IP into domain name and vice versa

What Is The Purpose Or Http Protocol?

It is used to transfer data or files over internet.

At Which Layer Hub Work?

Hub works at physical layer.

Home Many Types Of Rip Messages?

There are two type of RIP messages, these are request and respond.