Important Internetworking Interview Questions
1.What are the three layers of the Cisco Hierarchical Model?
The three layers of the Cisco Hierarchical Model are:
1. the access layer
2. The distribution layer
3. The core layer
2.In the Cisco Hierarchical Model,what is the function of the access layer?
Sometimes referred to as the desktop layer,the access layer is the point at which users connect to the network through low-end switches.
Some functions of the access layer include:
1. Connectivity into the distribution layer
2. Shared Bandwidth
3. MAC Address filtering (switching)
4. Segmentation
3.What is the function of the distribution layer in the Cisco Hierarchical Model?
The distribution layer is also known as the workgroup layer. It is the demarcation point between the access and core layers of the network. Its primary function is to provide routing,filtering,and WAN access. The distribution layer determines how packets access the core,so it is the layer at which to implement policy-based connectivity.
Some functions include the following:
1. Collection point for access layer devices
2. Broadcast and multicast domain segmentation
3. Security and filtering services such as firewalls and access lists
4. Providing translation between different media types
5. Inter-VLAN routing
4.What is the role of the core layer in the Cisco Hierarchical Model?
The core layer is the backbone of the network. Its main function is to switch traffic as fast as possible. Therefore,it should not perform any filtering to slow down traffic. The ISO’s OSI Reference Model contains seven layers. What are they?Include the layer number and name of each layer in your answer.
The seven layers of the OSI model are as follows:
1. Layer 7 – Application layer
2. Layer 6 – Presentation layer
3. Layer 5 – Session layer
4. Layer 4 – Transport layer
5. Layer 3 – Network layer
6. Layer 2 – Data link layer
7. Layer 1 – Physical layer
5.What are some reasons that the industry uses a layered model?
Here are some reasons why the industry uses a layered model:
1. It encourages industry standardization by defining what functions occur at each level.
2. It allows vendors to modify or improve components at only one layer versus rewriting the whole protocol stack.
3. It helps interoperability by defining standards for the operations at each level.
4. It helps with troubleshooting.
6.What does the application layer (Layer 7) of the OSI model do,and what are some examples of this layer?
The application layer is the layer that is closest to the user. This means that this layer interacts directly with the software application.
The application layer’s main function is to identify and establish communication partners,determine resource availability,and synchronize communication.
Some examples include the following:
1. TCP/IP applications such as Telnet,File Transfer Protocol (FTP),Simple Mail Transfer Protocol (SMTP),WWW,and HTTP.
2. OSI applications such as Virtual Terminal Protocol,File
3. Transfer,Access,and Management (FTAM),and Common Management Information Protocol (CMIP).
7.In the OSI model,what are the responsibilities of the presentation layer (Layer 6)?Give some examples of this layer.
The application layer is the layer that is closest to the user. This means that this layer interacts directly with the software application. The application layer’s main function is to identify and establish communication partners,determine resource availability,and synchronize communication.
Some examples include the following: Also known as the translator,the presentation layer provides coding and conversion functions to application layer data. This guarantees that the application layer on another system can read data transferred from the application layer of a different system.
Some examples of the presentation layer are:
1. Compression,decompression,and encryption
2. JPEG,TIFF,GIFF,PICT,QuickTime,MPEG,and ASCII
8.What are the functions of the session layer (Layer 5)?Give some examples.
The session layer is responsible for creating,managing,and ending communication sessions between presentation layer entities. These sessions consist of service requests and responses that develop between applications located on different network devices. Some examples include SQL,RPC,NFS,X Window System,ZIP,NetBIOS names,and AppleTalk ASP.
9.What is the transport layer (Layer 4) responsible for?Give some examples of transport layer implementations.
The transport layer segments and reassembles data from upper-layer applications into data streams. It provides reliable data transmission to upper layers. End-to-end communications,flow control,multiplexing,error detection and correction,and virtual circuit management are typical transport layer functions. Some examples include TCP,UDP
*,and SPX. Note: watch out for end-to-end on communications on the exam! Transport layer.
10.What is flow control,and what are the three methods of implementing it?
Flow control is the method of controlling the rate at which a computer sends data,thus preventing network congestion.
The three methods of implementing flow control are
1. Buffering
2. Congestion avoidance
3. Windowing
4. Almost certain to be on the exam.
11.Describe the function of the network layer (Layer 3),and give some examples of network layer implementations.
The network layer provides internetwork routing and logical network addresses. It defines how to transport traffic between devices that are not locally attached. The network layer also supports connection-oriented and connectionless service from higher-layer protocols. Routers operate at the network layer. IP,IPX,AppleTalk,and DDP are examples of network layer implementations.
12.Are network layer addresses physical or logical?
Network layer addresses are logical addresses specific to the network layer protocol being run on the network. Each network layer protocol has a different addressing scheme. They are usually hierarchical and define networks first and then host or devices on that network. An example of a network address is an IP address,which is a 32-bit address often expressed in decimal format. 19
8.0.1 is an example of an IP address in decimal format.
13.How do routers function at the network layer of the OSI model?
Routers learn,record,and maintain awareness of different networks. They decide the best path to these networks and maintain this information in a routing table.
The routing table includes the following:
1. Network addresses,which are protocol-specific. If you are running more than one protocol,you have a network address for each protocol.
2. The interface the router uses to route a packet to a different network.
3. A metric,which is the distance to a remote network or the weight of the bandwidth,load,delay,and reliability of the path to the remote network.
4. Routers create broadcast domains. One interface on a router creates a single broadcast domain and collision domain. However,an interface on a switch creates only a single collision domain.
14.In addition to learning the remote network and providing a path to the network,what other functions do routers carry out?
Routers perform these tasks:
1. Routers,by default,do not forward broadcasts or multicasts.
2. Routers can perform bridging and routing functions.
3. If a router has multiple paths to a destination,it can determine the best path to the destination.
4. Routers forward traffic based on Layer 3 destination addresses.
5. Routers can connect Virtual LANs (VLANs).
6. Routers can provide quality of service for specified types of network traffic.
15.What is the responsibility of the data link layer (Layer 2)?
The data link layer provides functional and procedural means for connectionless mode among network entities,and for connection mode entities it provides the establishment,maintenance,and release of data link connections among network entities and for the transfer of data link service data units.
The data link layer translates messages from the network layer into bits for the physical layer,and it enables the network layer to control the interconnection of data circuits within the physical layer. Its specifications define different network and protocol characteristics,including physical addressing,error notification,network topology,and sequencing of frames.
Data link protocols provide the delivery across individual links and are concerned with the different media types,such as 80
3. The data link layer is responsible for putting 1s and 0s into a logical group. These 1s and 0s are then put on the physical wire. Some examples of data link layer implementations are IEEE 80
2.2/80
2.3,IEEE 80
2.5/80
2.2,packet trailer (for Ethernet,the FCS or CRC),FFDI,HDLC,and Frame Relay.
16.The IEEE defines what two sublayers of the data link layer?
1. The two sublayers of the data link layer are
2. The Logical Link Control (LLC) sublayer
3. The Media Access Control (MAC) sublayer
4. These two sublayers provide physical media independence.
17.For what is the LLC sublayer responsible?
The Logical Link Control (80
2.2) sublayer is responsible for identifying different network layer protocols and then encapsulating them to be transferred across the network. An LLC header tells the data link layer what to do with a packet after it is received
18.What functions does the Media Access Control (MAC) sublayer provide?
The MAC sublayer specifies how data is placed and transported over the physical wire. The LLC layer communicates with the network layer,but the MAC layer communicates downward directly to the physical layer. Physical addressing (MAC addresses),network topologies,error notification,and delivery of frames are defined at this sublayer.
19.What are some network devices that operate at the data link layer?
Bridges and switches are network devices that operate at the data link layer. Both devices filter traffic by MAC addresses.
20.What is the function of the OSI model’s physical layer (Layer 1)?Give some examples of physical layer implementations.
The physical layer defines the physical medium. It defines the media type,the connector type,and the signalling type (baseband versus broadband). This includes voltage levels,physical data rates,and maximum cable lengths.
The physical layer is responsible for converting frames into electronic bits of data,which are then sent or received across the physical medium. Twisted pair,coaxial cable,and fiber-optic cable operate at this level. Other implementations at this layer are repeaters/hubs,RJ-4
5.
21.The Ethernet and IEEE 80
2.3 standards define what three physical wiring standards that operate at 10 Mbps?
These physical wiring standards operate at 10 Mbps:
1. 10Base2
2. 10Base5
3. 10BaseT
22.What are collision domains?
In Ethernet segments,devices connect to the same physical medium. Because of this,all devices receive all signals sent across the wire. If two devices send a packet at the same time,a collision occurs. In the event of a collision,the two devices run a backoff algorithm and resend the packet.
The devices retransmit up to 15 times. The first station to detect a collision issues a jam signal. When a jam signal is sent from a workstation,it affects all of the machines on the segment,not just the two that collided; when the jam signal is on the wire,no workstations can transmit data.
The more collisions that occur in a network,the slower it will be,because the devices will have to resend the packet. A collision domain defines a group of devices connected to the same physical medium.
23.What are broadcast domains?
A broadcast domain defines a group of devices that receive each others’ broadcast messages. As with collisions,the more broadcasts that occur on the network,the slower your network will be. This is because every device that receives a broadcast must process it to see if the broadcast is intended for it.
24.What devices are used to break up collision and broadcast domains?
Switches and bridges are used to break up collision domains. They create more collision domains and fewer collisions. Routers are used to break up broadcast domains. They create more broadcast domains and smaller broadcast areas.
25.How do the different layers of the OSI model communicate with each other?
Each layer of the OSI model can communicate only with the layer above it,below it,and parallel to it (a peer layer). For example,the presentation layer can communicate with only the application layer,session layer,and presentation layer on the machine it is communicating with.
These layers communicate with each other using protocol data units (PDUs). These PDUs control information that is added to the user data at each layer of the model. This information resides in fields called headers (the front of the data field) and trailers (the end of the data field).
26.What is data encapsulation?
A PDU can include different information as it goes up or down the OSI model. It is given a different name according to the information it is carrying (the layer it is at). When the transport layer receives upper layer data,it adds a TCP header to the data; this is called a segment.
The segment is then passed to the network layer,and an IP header is added; thus,the data becomes a packet. The packet is passed to the data link layer,thus becoming a frame. This frame is then converted into bits and is passed across the network medium. This is data encapsulationApplication layer — Data
1. Transport layer — Segment
2. Network layer — Packet
3. Data link layer — Frame
4. There is also the Physical Layer — Bits
27.What is the difference between a routing protocol and a routed protocol?
Routing protocols determine how to route traffic to the best location of a routed protocol. Examples of routing protocols are RIP,EIGRP,OSFP,and BGP. Examples of routed protocols are IP and IPX.
28.What 3 devices are used to segment a LAN?
1. Router
2. Switch
3. Bridge