Top Catia V5 Interview Questions Part – 2
What Is The Importance Of Sketch Tools?
This tool bar only appears when you are in sketcher workbench. The four tools found in this tool bar are toggle tools. When tool is highlighted the tool is on. This particular tool bar changes depending on what other sketcher workbench tool is currently selected.
Is It Possible To Directly Enter The Part Design Workbench, When We Start The Catia Session. Instead Of Assembly Design Workbench?
No, we cannot enter directly into the part design.
What Is The Kernel Of Catia?
CNEXT
What Is Kernel?
The kernel is the basic indispensable part of an operating system that allocates resources such as low- level hardware interfaces & security.
What Do Catia Pi, Catia P2 And Catia P3 Mean?
Pi, P2 and P3 will indicate the different types of platforms of CATIA. Higher the number sophisticated will be the software.
What Are The Different Options Available In Quick Trim Command?
BREAK & RUBBER in removes part of the element, which is clicked.
BREAK & RUBBER out removes part of the element, which is not clicked.
BREAK & KEEP keeps both parts of elements after breaking.
Can We Select Non-planar Surface As Sketch Plane?
No, we cannot select a non-planar surface as sketch.
What Is The Use Of Isolate In Sketcher Workbench?
Isolated is used when 3D geometry is projected on to a sketch in order to be modified and used as part of the sketch’s profile.
If I Donor Want The Relation B/w Original And Mirrored Elements What Should I Do?
Explore and the relation b/w the original and mirror element doesnt exit.
How Do We Change, Sketch’s Reference Plane?
Right click on the sketch whose reference plane is to be changed and select the change reference plane and then select new reference.
How Many Axis Can Be Created In A Single Sketch?
Only one axis can be created in a sketch, if more than one axis are drawn then only one of them, the latest one, will be axis and others will be converted into reference elements.
Can Axis Be Converted Into Line Or Vice Versa?
We can convert line into axis but axis cannot convert into line.
Can We Redefine The Sketches?
Yes.
What Is Use Of Sketch Analysis?
To check whether the sketch is fully closed or not so that the sketch can be used or not so that the sketch can be used for further operations in part design.
Where Do We Use Axis?
Axis is used in creating shaft (revolved) feature.
What Is Rho Value For Ellipse, Parabola And Hyperbola?
Parabola has RHO values of 0.5, Ellipse has RHO value between 0 & 0.5 and Hyperbola has RHO value b/w 0.5 & 1.0.
How Many Dimensions Are Required To Constrain The Ellipse?
Three dimensions are required namely major axis, minor axis and the distance from the origin.
Mention The Color Code Of Iso-constrained, Insider, And Over Con Strained Elements?
The color code for these elements is Green. White and Magenta respectively.
How Do You Create A Negative Polarity Body In Part Design?
After inserting a new body If you use Negative feature as fist feature in a body the polarity of the body will be negative. Negative features like Pocket, Groove, Slot Hole etc.
What Is The Alternate Option For Intersect Boolean Option?
Solid Combine is alternative option for Intersection Boolean operation.