Frequently Asked Catia V5 Interview Questions
Expand Catiav?
Computer Aided Three Dimensional Interactive Application.
What Is The Save Extension Of Sketcher File?
CAT Part
Does Catl4v5 Work On Unix Platform?
Yes
Is It Possible To Increase The Size Of Plane Boundary Representation & How?
Yes, go for Tools-Options- Infrastructure-Part structure-Display.
Is It Possible To Directly Enter In To Sketcher Workbench?
No, it is not possible to enter in to sketcher workbench directly. We have to go for any workbench &form there we can enter the sketcher workbench..
Which Is The Tool Used To Exit From Sketcher Workbench To Part Design Workbench?
Exit Sketcher.
What Is Use Of Construction Elements?
Construction elements assist in sketching the required profile in sketcher.
What Are The Default Units Of Lmt (length. Mass And Time) ?
mm, Kg, Second.
What Is Sketch Tools In Sketcher Workbench & Explain The Importance Of It?
SKETCH TOOLS in sketcher workbench are the commands, which find very use in creating sketches. SKETCH TOOLS are namely geometric and dimensional constraints, construction elements/standard elements and Grid option.
They play very important role in sketching, whenever we want to constrain a sketch we use these options and if we want to convert any element into a construction element once again these options come into picture.
Is It Possible To Hide Specification Tree?
Yes, with help of F3 button, but the option in Tools conunand must be checked to allow this.
What Is Show/hide Option?
Show mode enable us to see all the components presently opened and in Hide mode we can hide the desired elements from the view for time being.
That Is The Use Of Cut Part By Sketch Plane?
This task shows how to make some edges visible. In other words, we are going to simplify the sketch plane by hiding the portion of the material that is not needed for sketching.
How Do You Measure Arc Length?
We can measure arc length by using MEASURE ITEM command. Sometimes we need to customize the option for arc length if it is not checked earlier using customization in MEASURE ITEM command.
What Is The Meaning Of True Dimension?
True dimension is the dimension desired after the machining. In other words, this is the value that should be attained after the machining.
What Do ‘you Mean By Iso-constraints?
If all of the degrees of freedom of geometry have been takes up by a consistent combination of dimensions & fixed geometry,. That geometry is said to be ISO-CONSTRAINED. Geometry that still has some degrees of freedom is said to be UNDER constrained.
What Is The File Extension Of A Part File?
File Extension of Part file is dot CATPart (.CATPart)
Which Are The Neutral File Extensions We Caii Use For The Part File?
IGES/igs, STEP fstp, STL, WRL, etc
Can You Create A Block Using A Line/is It Possible To Extrude A Line Or Open Profile Using Pad?
Yes, ou can create a block using line, when you are extruding a line or any open profile you can check thick option in Pad feature (to avoid Error message). You can Give limit one, Limit Two and Thickness one and two. You will get Block from line and thin sheet from any open profile.
Note:
Dont use this option to create a sheet metal part using part design.
What Is The Meaning Of Mean Dimension?
Mean dimension is the dimension that should be mern of all the dimensions, which are tolerance.
How Many Degrees Of Freedom Are There For Points. Lines, Circles & Ellipse In 2 Dimensions?
Degree of freedom for points & ellipse is 2 for circles it is 3 & for ellipse it is 5 in two dimensions.